tie bar distance in injection moulding machine

Analysis of premature failure of a tie bar in an injection ...

Dec 01, 2006 · The 150-tonne molding machine has a mould size of 300 × 300 mm, mould stroke of 430 mm, minimum and maximum mould heights of 220 and 550 mm and platen size of 700 × 700 mm. Four 70 mm diameter tie bars of length 2.23 m support the platens and the distance between tie bars is 500 mm. The moving platen slides on the four tie bars back and forth for every cycle during the application …

Cited by: 9

Injection Molding Machine - Beaumont Technologies, Inc.

The space between the tie-bars limits the size of the mold that can be placed in the injection molding machine. Mold – Provides the formation and ejection of a molded part. Controller – Controls the injection molding machine.

Safety at injection moulding machines PPS4(rev1)

* Large machines are defined as those with ≥1.2 m between the tie bars, or the equivalent distance which limits access on machines without tie bars, or those where it is possible to stand between...

File Size: 123KB

5 Factors to Consider When Buying Plastic Injection ...

Feb 27, 2018 · Tie Bar Spacing is defined as the space between the horizontal tie-bars on an injection molding machine. Basically, this measurement, along with the platen max spacing, determines the maximum size of molds that can be placed in the molding machine.

Tie-bar-less Injection Molding Machine - Plastics Technology

Tie-bar-less machine design can improve your efficiency and economy in injection molding. The overall mold size that you are using in production dictates the size of the machine, not the maximum clamping force. The tie-bar-less machine allows the use of a smaller footprint since the mold can be fitted on the entire face of the platen without tie-bars getting in your way.

Three plate mold opening sequence - ecomolding

Jul 29, 2019 · 2. The cavity plate continues to move backwards with the injection molding machine, so that the small tie bar is also moved, which in turn drives the runner plate to move to the preset distance (usually 8mm), so as to remove the gates and runner. After completing the preset distance, the small tie bar and the cavity plate stop moving. 3.

tie bar for injection molding machine, tie bar for ...

A wide variety of tie bar for injection molding machine options are available to you, There are 130 suppliers who sells tie bar for injection molding machine on , mainly located in Asia. The top countries of supplier is China, from which the percentage of tie bar for injection molding machine supply is 100% respectively.

TIE BAR STRAIN AGE INSTRUCTION MANUAL

DETERMINING TIE BAR PRESSURE FOR WHICH YOUR MACHINE WAS DESIGNED P=Fyy/areayy where: P = pressure expected on tie rod at full lockup {psi} Fyy = total rated force { lbs} {= total rated tonnage x 2000lbs} areayy = 4 x 3.14 x (D/2)5 {sq in} {D= diameter of one tie bar} If P does not equal 10,000 psi, divide P by 10,000.

Injection Molding: Definition, Construction, Working ...

The molding of the Injection machine has a clamping unit either the hydraulic type or the toggle type. It is available to hold the pressure developed and withstand the forces and stresses. The molds internal pressure in the molding is 350-500kg/cm2, the clamping force F …

Used injection moulding machine/ Kosmos Engineering - …

Used injection moulding machine/ Kosmos Engineering, Greater Noida. 1,932 likes · 40 talking about this. We have stock of around 150 machines out of which 3 nos is L&T Demag 100 T and 3 nos 150 T...

How to select a plastic injection molding machine.

Jan 04, 2014 · It is advise that there is a clearance of 25mm on each side for small mold and 50 mm for big mold. 19. tie bar diaMeter • If the tie bar tension are even, the stress in each of them is given by • Stress= clamping force +1000/ (3.14* d 2 ) where stress is in kg/mm 2 clamping force is in tones and dia d is in mm. • High tensile has a ...

Used Injection Molding Machines & Auxiliary | Absolute ...

400 Ton, 59.2 oz., Van Dorn 400HT Injection Molding Machine. Tonnage: 400; Shot Size: 59.2 oz. Clamp Stoke: 26" Open Daylight: 54" Mold Thickness: 8" Clamp Style: Toggle; Platen Size: 42" x 42" Tie Bar Spacing: 28" x 28" Tie Bar Diameter: 5" Ejector Force: 12.6" Ejector Stroke: 6" Controls: P-3000; Voltage: 460/3/60; Full Details

tie bar for injection molding machine, tie bar for ...

311 tie bar for injection molding machine products are offered for sale by suppliers on , of which plastic & rubber machinery parts accounts for 1%. A wide variety of tie bar for injection molding machine options are available to you, such as new. You can also choose from turkey tie bar for injection molding machine, as well as from manufacturing plant, building material shops tie bar for injection molding machine, and whether tie bar for injection molding machine …

Mold clamping force adjustment device of toggle type ...

An injection molding machine comprising a toggle type mold clamping system, wherein a fixed platen and a rear platen are coupled to each other by a tie bar, a movable platen is guided by the tie bar so as to be movable between the fixed platen and the rear platen, and the toggle type clamping mechanism comprises a toggle mechanism which is positioned between the rear platen and the movable platen and which is stretched and contracted, said injection molding machine …

Moulding Machines | Leadway Plastic Machinery | المنوفية

LeadWay Führung servo injection moulding machines range from 60ton to 1300ton meeting EU CE and Korean KS standard. Our servo injection machines are competent with plastic injection molding for precision,thin-wall,high speed, PVC, PET products. We have established agents in Italy, Spain, Czech, Poland, Turkey, Iran, Russia, etc.

Sodick LSR Series - LIM / Silicone Molding Machine

Max. Clamping Force tf ( (US ton) 20 (22) Tie Bar Distance mm (inch) 260 x 300 (10.2 x 11.8) Platen Dimensions mm. 420 x 460. Platen Dimensions inch. 16.5 x 18.1.

Shibaura Machine TiA110S Injection Molding Machine

The TiA series servo hydraulic injection molding machine combines our energy efficient servo technology with our proven hydraulic design resulting in a cost-effective, high performance solution for molding small parts with precision and ease. ... Tie Bar Distance (HxV) - US Standard (in) 1. 26.0 x 24.0. Platen Dimensions (HxV) - US Standard (in ...

Brand: Shibaura Machine

Tie-bar-less injection molding machines - a success story

Feb 20, 2020 · Until then, it was regarded as an unshakable design principle that an injection molding machine had to have four tie bars. The idea for the new solution came from the processors themselves....

Magna Toggle | Milacron

Combining the advantage of a precise and accurate toggle mechanism with advanced user-friendly controls, the Magna T Servo is a high-value injection molding machine. Reduced heat generation results in longer life for the hydraulic components and enhanced oil life, while the head load on the factory floor and cooling water consumption is reduced.

Shibaura Machine EC30SXIIV50 Injection Molding Machine

Linear Guides for Rigid, Precise Machine Movements. On the moving platen, linear guides are used instead of tie bar bushing to ensure steady, precise movement. This friction free drive system is also used on the injection unit to ensure more accurate injection speed and back pressure control.

Brand: Shibaura Machine

Zhengzhou Really Imp.& Exp. Co., Ltd. ,Farm Machinery ...

rotational moulding machine tie bar for injection molding machine; 300T 200 T 150ton plastic injection molding machine; Automatic vertical plastic can injection blow molding machine; variable displacement pump injection molding machine controller; …

Broken_Tie_Bar_Repair_For_Die_Cast_And_Injection_Molding ...

Poor maintenance; everything mechanical in a die casting machine or injection molding machine including the machine linkage, tie bars, tie bar nuts and platens are wearing; as an example the threads on the die height nuts actually wear from the continuous loading and unloading of the machine, these worn threads cause "slop" between the tie bars ...

US20140120193A1 - Injection molding machine having tie …

An injection molding machine has a die-height adjustment system. External screws formed individually on four tie-bars and die-height adjusting nuts threadedly engaged therewith are configured to be rotated independently with one another. In processes prior to mold clamping, the die-height adjusting nuts are rotated so that movable and stationary platen surfaces maintain a desired parallelism.

Cited by: 5

Analysis of premature failure of a tie bar in an injection ...

Premature failure of a tie bar made of AISI 4140 steel in a 150 tonne plastic injection-molding machine has been analyzed. Although the nominal tensile stress acting on the tie bars (95.5. MPa) is far lower than the yield strength of this material (750–900 MPa), the tie bars are subjected to a pulsating cyclic loading during the plastic molding process.

Cited by: 9

Used 450 Ton Plastic Injection Molding Machines for sale ...

1995 Hemscheidt HPM 1000 Ton Injection Moulding Machine - Controls: PLC - Tie bar distance: 1.150 x 1.150 mm - Platen distance: ax. 2.230 mm - Platen size: 1.700 x 1.700 mm - Mould opening: 500 - 1.250 mm - Mould height: in 400 / max. 980 mm - Screw diameter: 100 mm -...

Price Range: $21,400 - $104,100

tie-bar-less hydraulic injection molding machine | ENGEL ...

Easy mold change & mold protection. The tie-bar-less ENGEL victory hydraulic machine gives you absolutely full access to the platen and mold area. Your operators and maintenance team will be able to do quick mold changes in no time from one short production run to the next. Imagine removing the mold horizontally from the machine using a set of straps and a forklift or crane.

Injection & Blow Molding - Machine Injection

Model 221M-350-75, Injection Molding Machine, 2 Oz 199 Description: Used 35 Ton Arburg Allrounder. Injection Molding Machine, Model 221 M 350-75 Serial# 167791, Built in 1996 Clamp Force.35 Ton Shot Size.2 Oz Open Stroke.200 mm Mould Height.150-300mm Daylight.350-500mm Tie Bar Distance.221mm Platen Size.324" x 250" mm. Stock#7706.

Safety at injection moulding machines PPS4(rev1)

* Large machines are defined as those with ≥1.2 m between the tie bars, or the equivalent distance which limits access on machines without tie bars, or those where it is possible to stand between the guard and mould. Often ancillary equipment is added to the injection moulding machine production line. You should ensure

Shibaura Machine TiA110S Injection Molding Machine

The TiA series servo hydraulic injection molding machine combines our energy efficient servo technology with our proven hydraulic design resulting in a cost-effective, high performance solution for molding small parts with precision and ease. ... Tie Bar Distance (HxV) - US Standard (in) 1. 26.0 x 24.0. Platen Dimensions (HxV) - US Standard (in ...

US20140120193A1 - Injection molding machine having tie-bar ...

An injection molding machine has a die-height adjustment system. External screws formed individually on four tie-bars and die-height adjusting nuts threadedly engaged therewith are configured to be rotated independently with one another. In processes prior to mold clamping, the die-height adjusting nuts are rotated so that movable and stationary platen surfaces maintain a desired parallelism.

how to check the technical parameters of injection molding ...

Before you choosing the model of injection molding machine, you need to know the definition of the important technical parameters of servo the injection molding machine,such as injection capacity,clamping force,injection pressure and speed,tie-bar space,etc.. Injection Capacity. It is defined as the maximum weight of the PS plastic material injected into the air.

How to select a plastic injection molding machine.

Jan 04, 2014 · It is advise that there is a clearance of 25mm on each side for small mold and 50 mm for big mold. 19. tie bar diaMeter • If the tie bar tension are even, the stress in each of them is given by • Stress= clamping force +1000/ (3.14* d 2 ) where stress is in kg/mm 2 clamping force is in tones and dia d is in mm. • High tensile has a ...

OEM Tie Bars for Injection Molding Machines

Tie Bars on an injection molding press is the most important area. With our 20 plus years of experience we have helped in supplying numerous new and repaired tie bars. Our tie bars can be either Chrome Plated or polished and Ground. We can also supply the Tie Bar Nuts as well and ensure proper tolerances and matching specifications to the Tie Bars.

Used Injection Molding Machine - Used Injection Molding ...

Manufacturer of Used Injection Molding Machine - Used Injection Molding Machines, Netstal Injection Molding Machine, NISSEI 60 TON INJECTION MOLDING MACHINE and TOSHIBA 650 TON INJECTION MOULDING MACHINE offered by Disha Technologies, Delhi. ... Mitsubishi 850 TON-120 MM INJECTION MACHINE: TIE BAR DISTANCE: 1060 X 1060 MM SHOT WEIGHT:3991 CM3 ...

Engel ES 5550-1100 DUO Injection moulding machine Used ...

distance between tie bars h:: 1400 mm distance between tie bars v:: 1150 mm size of mould plates h: 2020 mm size of mould plates v: 1830 mm min. mould height: 600 mm max. mould height: 1200 mm max. open daylight: 2400 mm opening stroke: 1800 mm ejector stroke: 300 mm ejector force: 215 kN centering diameter of moving platen: 250 mm

Used 450 Ton Plastic Injection Molding Machines for sale ...

1995 Hemscheidt HPM 1000 Ton Injection Moulding Machine - Controls: PLC - Tie bar distance: 1.150 x 1.150 mm - Platen distance: ax. 2.230 mm - Platen size: 1.700 x 1.700 mm - Mould opening: 500 - 1.250 mm - Mould height: in 400 / max. 980 mm - Screw diameter: 100 mm -...

Plastic Injection Molding Machines - Negri Bossi NB-40 40 ...

Negri Bossi NB-40 Plastic Injection Molding Machine having 40 Tons Clamping Force. When in need to procure a Quality Used Injection Molding machine, the buyer needs to be sure of the pedigree of the machine and more importantly the Importer, Dealer since the machine is in used condition.Sound Machines (India) Inc. is a leading Importer of Quality used machines situated at Navi Mumbai-Mahape.

Broken_Tie_Bar_Repair_For_Die_Cast_And_Injection_Molding ...

Poor maintenance; everything mechanical in a die casting machine or injection molding machine including the machine linkage, tie bars, tie bar nuts and platens are wearing; as an example the threads on the die height nuts actually wear from the continuous loading and unloading of the machine, these worn threads cause "slop" between the tie bars ...

Used Injection Molding Machines | Small Injection Machine

Upto 150 ton Injection Molding Machines. 1) BOY 50 Ton Injection Molding Machine - Clamp type: RAM Type - Platen size: 500 x 500 mm - Distance Between tie bars: 305 x 305 mm - Shot Weight: 105 grams 2) Negri Bossi 40 Ton .....

tie bar for injection molding machine, tie bar for ...

A wide variety of tie bar for injection molding machine options are available to you, There are 144 suppliers who sells tie bar for injection molding machine on , mainly located in Asia. The top countries of suppliers are China, Taiwan, China, from which the percentage of tie bar for injection molding machine supply is 99%, 1% ...

Concor Tie Bars for Injection Molding Machines - Concor ...

The tie bar is a key component for consistent and quality molding, as it maintains a parallel orientation of the platens. ... Please contact us for information or for a proposal on tie bars. Request a Quote on Tie Bars. Concor Tool and Machine Inc. 9665 N.Concor Road, Hayward, Wisconsin, 54843 USA +1 715-462-3756 [email protected]

Sanyu Injection Molding Machines - SANYU USA

VJ rubber injection molding machines high performance machine range

Magna Toggle | Milacron

Combining the advantage of a precise and accurate toggle mechanism with advanced user-friendly controls, the Magna T Servo is a high-value injection molding machine. Reduced heat generation results in longer life for the hydraulic components and enhanced oil life, while the head load on the factory floor and cooling water consumption is reduced.

Analysis of premature failure of a tie bar in an injection ...

Premature failure of a tie bar made of AISI 4140 steel in a 150 tonne plastic injection-molding machine has been analyzed. Although the nominal tensile stress acting on the tie bars (95.5. MPa) is far lower than the yield strength of this material (750–900 MPa), the tie bars are subjected to a pulsating cyclic loading during the plastic molding process.

Zhafir Venus Series (VE) – Zhafir Plastics Machinery

The Venus Series influences the global market for electric injection molding machines more than ever before. With clamping forces of up to 8,000 kN and injection speeds in several performance levels up to 500 mm/s, Venus produces clean, high-quality precision and extremely thin-walled parts at an attractive price/performance ratio.

Injection Molding Machine - 150 Ton Horizontal Injection ...

We are offering 150 Ton Horizontal Injection Molding Machine to our clients. The offered molding machine is designed using optimum quality components and advanced technology in sync with industry standards. Our valuable clients can avail this molding machine from us at pocket-friendly prices. Features: Minimum maintenance

VR-Series (CE) Injection Molding Machines from Victor …

Victor Taichung introduces to you, the new VR series of Plastic Injection Moulding machinery. With a tonnage of 350-850 tons and using the advanced V-8000C controller and semi-closed looped hydraulic system, the new VR-range can match your requirements of quality, high-speed production and precision moulding.

ROBOSHOT(Electric Injection Molding Machine) - …

The FANUC ROBOSHOT α-S i A series is an electric injection molding machine that incorporates FANUC standard CNC, so as to extend performance in precision molding. New function "Quick and Simple Start-up of Robotization" of ROBOMACHINE (August 2020) Product Brochures.

Shibaura Machine EC30SXIIV50 Injection Molding Machine

Linear Guides for Rigid, Precise Machine Movements. On the moving platen, linear guides are used instead of tie bar bushing to ensure steady, precise movement. This friction free drive system is also used on the injection unit to ensure more accurate injection speed and back pressure control.

Used Engel machinery for sale on TradeMachines

ES 4.400/650 CL injection moulding machine|Control CC-90-AO2|Year 1.991|Bimetallic camera|Screw 90 mm|Clamping force 650 tons|Tie bar distance 900 x 900 mm|Plates dimensions 1.360 x 1.390 mm,|Mould thickness 400/920 mm|Opening travel 900 mm|Injection pressure 1.750 bar|Injection volume 2.481 cm3|Injection capacity 2232 g|Dosifier hopper ...

Engel ES 5550-800 DUO Injection moulding machine Used ...

distance between tie bars h:: 1170 mm distance between tie bars v:: 1000 mm size of mould plates h: 1650 mm size of mould plates v: 1470 mm min. mould height: 500 mm max. mould height: 1100 mm max. open daylight: 2700 mm opening stroke: 1600 mm ejector stroke: 300 mm ejector force: 180 kN centering diameter of moving platen: 250 mm

Used Injection moulding machinery for sale - Machineseeker

Injection moulding machine Manufacturer Ktaus Maffai Type KM50-180CX year of construction 2005 clamping force 500kN installation height 200 - 600mm opening stroke 400mm tie bar dimension 370mm screw diameter 28mm max. injection weight 67gr approx. 48.000h sprue picker ASS Material separator Koch MWT 40 C2tsw77gy distance between tie bars 450 x 450mm screw diameter 28mm Machine …

US20110200701A1 - Platen for an injection molding machine ...

U.S. Pat. No. 5,776,402 (Glaesener) discloses an injection molding machine that includes a stationary platen having a first mold half, at least one movable platen having a second mold half for forming a mold with the first mold half, tie bars for guiding the movable platen relative the stationary platen, and an injection unit for injecting ...

Precision Midrange Tonnage Injection Molding Machine – NIIGATA

The Niigata MD-S8000 Series All Electric Precision Midrange Tonnage Injection Molding Machine combines a longer stroke clamp and linear motion guide. ... Larger Tie Bar Distance. Tie bar distance…

Used injection moulding machine/ Kosmos Engineering - …

Used injection moulding machine/ Kosmos Engineering, Greater Noida. 2,021 likes · 58 talking about this. We have stock of around 150 machines out of which 3 nos is L&T Demag 100 T and 3 nos 150 T...

Used Injection Molding for sale in Taiwan | Machinio

Standard injection molding machine 2. Silicon injection molding machine ... Taiwan. Click to Request Price. Energy Saving Servo Hybrid Injection Molding Machine ... III ( all electric ) Year 1999 made in Japan Clamping force 75 tons Screw size 32 mm Tie bar distance 360 x 360 mm 2 sets. Taoyuan City, Taiwan. Click to Request Price. 1994 Chuan ...

Demag Injection molding machines used machine for sale

Injection moulding machine Demag modular 650/1000-3300 Built in 1995 Closing unit Clamping force [kN] 6500 Holding force 7150 Clamping plate (hxv) [mm] 1450x1350 Light width (hxv) [mm] 1000x900 Tool opening path max. ... 2000 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm ...

Horizontal Injection Molding Machine

Max. clamping force (kN) 294〔392〕. Tie bar distance W×L (mm) 310 x 310. Min. mold thickness/Max. mold thickness (mm) 150 / 360. Machine size L×W×H (mm) 3150 x 1064 x 1679. Mold clamping force [392kN] is an optional specification.

how to check the technical parameters of injection molding ...

For injection molds with single-parting surface, the mold opening stroke is S>=H1+H2+5~10 (mm), H1 is the mold release distance (usually equal to the height of the mold core), and H2 is the workpiece height (including sprue system).

#126 Specifications of Plastic Injection Molding Machines ...

It is good to check the following specifications while comparing the specifications of different injection molding machines. Machine name; Screw diameter; Injection volume; Plasticizing capacity; Injection pressure; Injection ratio; Mold clamping force; Mold clamping method; Mold clamping stroke; Tie bar distance; Daylight; Die plate dimensions ...

Compact Horizontal Plastic Injection Moulding Machine ...

Payal India - We are manufacturers, exporters and supplier of Compact Injection Moulding Machine, Horizontal Injection Moulding Machine, Plastic Injection Moulding Machine, molding Machine manufacturer in India-Gujarat-Ahmedabad. ... Distance between Tie-bar in mm: 125x125: 175x175: 220 x 220: 270 x 270: 290 x 290: Hydraulic Equipment ...

ROBOSHOT electrical injection moulding machine

Perfectly automated injection moulding with the NEW FANUC ROBOSHOT α-S45 0i A 920 x 920 mm Tie bar distance 4500 kN Clamping force 2 injection units with 7 …

Injection Unit - Used Injection Molding Machine …

Three Phase. Tie Bar Distance. 410x410mm. Make. Made in Japan. Making Year. 1992 Made in Japan. Used Injection Molding Machine,TieBar Distance 410x410mm,Screw 40mm. Kawaguchi-100 Ton,Made in …

Injection Moulding Machine - Plastic Tub Moulding Machine ...

Injection Moulding Machine We are a leading Manufacturer of plastic tub moulding machine, plastic injection moulding machine, servo green 660/11050 ton plastic injection moulding machine, toggle type injection moulding machine, plastic bucket injection moulding machine and toggle moulding machine from Ahmedabad, India.

Used Injection Molding 100T to 300T

Used Injection Molding Machine Size VP180 Ton Tie Bar Distance 510x510mm Year(s) : 2006 Location : ASIA (South)

NETSTAL SYNERGY Injection molding machines used machine …

Net valley Synergy 600 / 5500E Injection moulding machine Control: DSP Year: In 2004 Clamping unit Clamping force t:600 Opening stroke mms: 0-1000 Distance between tie bars mm:1220x1220 installation height min / max. mm: 500/1000 Mould fixing platen size h x v:1620 / 1620 Injection unit Screw size mm:100 Injection shot weight in Polysterol gr ...

Demag Injection molding machines used machine for sale

Manufacturer: Demag Type: Ergotech 35-115 viva Built: 2000 Control: NC 4 Control Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 …

2. injection moulding - SlideShare

Jun 06, 2017 · 2. injection moulding 1. CORPORATE TRAINING AND PLANNING INJECTION MOULDING 2. CORPORATE TRAINING AND PLANNING Historical Background • A single-action hydraulic injection machine was designed in the U.S.A. in 1870 by Hyatt • Heating-cylinder design was first recognised in a patent issued to Adam Gastron in 1932.

Sodick EHV Series - SODICK - Injection Molding Machine

Max. Clamping Force tf ( (US ton) 20 (22) Tie Bar Distance mm (inch) 260 x 300 (10.2 x 11.8) Platen Dimensions mm. 420 x 460. Platen Dimensions Inch. 16.5 x 18.1.

JSW J75EII-P (1997) - Plastic Injection Molding Machines

JSW J75EII-P (1997) Plastic Injection Molding Machine | Model : J75EII-P | Year : 1997 | Screw diameter: 28mm | Clamping force : 75-Ton Distance between tie bars : 360x360mm The machine is in good working condition. Please contact us for more details and price.

Second Hand and Used Molding Machines - Manufacturers ...

Tie Bar Distance: 410x410mm. Make: Made in Japan. read more... Bombay Hydraulic (india) ... Capacity: We have sell second hand injection moulding machine rage of 80 ton to 600 tonn. Hello we are selling second hand injection moulding machine …

Our Machines — Diamond Plastics LLC

We proudly only use Absolute Haitian injection molding machines and Star Automation Robots. We believe in not only providing top notch service, but quality as well. Manufacturing sustainability is our key to success. We care about our environment, recycling over 95% waste incurred in our manufacturing processes, so you and your family can rest ...

Zhafir Venus Series (VE) – Zhafir Plastics Machinery

The Venus Series influences the global market for electric injection molding machines more than ever before. With clamping forces of up to 8,000 kN and injection speeds in several performance levels up to 500 mm/s, Venus produces clean, high-quality precision and extremely thin-walled parts at an attractive price/performance ratio.

Used Plastic Injection Moulding Machines - Used Injection ...

Used Kawaguchi Plastic injection Molding Machine Model KM-220B2, TieBar Distance 560x560mm,Screw Size 55mm, Mfrs Years 1996.

Haitian Mars Series (MA) – Haitian Plastics Machinery

Optimized core components such as the closed-loop injection unit increase the efficiency and production quality of the world‘s most successful injection molding machine. Clever software concepts complement the newly-formed hardware base with all common interfaces for open connectivity with smart manufacturing solutions.

OUR INJECTION MOLDING MACHINES

29.25" x 29.25" tie bar distance . 360 Tons maximum clamping pressure . Mitsubishi Injection Molding Machines . 1997 Mitsubishi MJII . 5 oz Shot . 15" x 15" tie bar distance . 90 Tons maximum clamping pressure . 1994 Mitsubishi MJ . 6 oz Shot . 15 "x 15" tie bar distance . 90 Tons maximum clamping pr essure . Toshiba Injection Molding Machines . 1987 Toshiba 170 Ton Injection Molding Machine

ENGEL e-victory injection moulding machine tie-bar-less ...

Hydraulic / Hybrid Tie-bar-less 101 – 400. Whether filigree or complex, optical or micro-parts: the ENGEL e-victory injection moulding machine delivers quality that meets the strictest requirements. With its servo-electric injection unit, the tie-bar-less mould area and the low-emission drive technology, the ENGEL e-victory is the smart, clean choice for the production of precision technical mouldings or …

Two Platen Injection Molding Machine 3200ton

Mold clamping force: 3200: Distance between tie bars: 2200x1800: Mold Platen size: 3200x2800: Mold thickness: 1000-2100: Max.Daylight: 3800: Mold locating ring: 315: Ejector stroke: 400: Ejector Force: 40: Number of temp control zone: 8: Motor power: 30x6: Heater capacity: 105: System pressure: 170: Oil tank capacity: 3000: Machine dimensions(L*W*H) 17x4.8x4.0: Machine weight(about) 180

Dr. Boy Spritzgiessautomaten :: BOY Injection Molding ...

Injection molding machine BOY 125 E. To Database. Significantly stronger, larger and more powerful, were the requirements for the development of BOY 125 E. In addition to the larger tie bar distance of 18.50 in and a maximum platen distance of 32.48 in, the new BOY top model offers a clamping force increase of 25%. 137.5 US tons clamping force characterizes now the new machine upper limit at BOY.

Dr. Boy Spritzgiessautomaten :: BOY Injection Moulding ...

In addition to the larger tie bar distance of 470 mm and a maximum platen distance of 825 mm, the new BOY top model offers a clamping force increase of 25%. 1.250 kN clamping force characterizes now the new machine upper limit at BOY. Given the easy handling of the machine, the users of the BOY 125 E enjoy maximum flexibility.

Injection Molding Machine - Horizontal Injection Molding ...

Manufacturer of Injection Molding Machine - Horizontal Injection Molding Machine, Horizontal PVC Injection Molding Machine, Automatic Vertical Plastic Injection Molding Machine and PVC Injection Molding Machine offered by JAY VIRU PLAST, Ahmedabad, Gujarat. ... Tie bar distance: 360x360 mm: Day light area: 790 mm: Platen size: 530x530 mm ( h x ...

Used Injection Molding Machine - Used Injection Molding ...

Manufacturer of Used Injection Molding Machine - Used Injection Molding Machines, Netstal Injection Molding Machine, NISSEI 60 TON INJECTION MOLDING MACHINE and TOSHIBA 650 TON INJECTION MOULDING MACHINE offered by Disha Technologies, Delhi. ... Mitsubishi 850 TON-120 MM INJECTION MACHINE: TIE BAR DISTANCE: 1060 X 1060 MM SHOT WEIGHT:3991 CM3 ...

Q-Series | Milacron

Introducing the new Q-Series! Milacron’s Q-Series is the latest globally available servo-hydraulic injection molding machine. With a tonnage range of 55 to 610 (500-5.500 KN), the Q-Series is built to perform in wide array of applications and configurations.

LOG-A8 90T Variable Pump Injection Molding Machine, …

90 Ton Injection Molding Machine with energy saving, High-precision and High-efficiency, especially can saving 35-80% energy, it met what the customer real need, have advantages such as efficient energy-saving, high-pressure high-speed, precision and stability and so on. Be a …

World class with tie-bar-less machines - Plastics News

"Injection molding machines with a tie-bar-less clamping unit are perfectly designed for this." The molds can be loaded into the barrier-free mold area in one piece and mounted directly from the ...

View Our Equipment List - ProtoJet Rapid Manufacturing

(2) Belmont EDM sinker machines (1) Cincinnati Milacron 85 ton injection mold press: Distance between tie bars: Horizontal 16 in. Vertical 14 in. Platen Size: Horizontal 24 in. Vertical 22.75 in. Tie bar diameter 3 in. Minimum Shut Height 5 in. Maximum Daylight 21 in. Maximum Shot Size 6.4 oz. (1) Van Dorn 300 ton injection mold press: Distance ...

Hybrid 2-color/dissimilar material molding machines ...

Inner mold assembly (integrated molding) can reduce assembly processes, number of components, and cycle time as well as saving mold costs and floor space. NISSEI double-injection molding machines remarkably rationalize production processes while adding high-values to the products. Hybrid 2-color/dissimilar material molding machines DCX120Ⅲ